Toshiba e-STUDIO557 - System

e-STUDIO556/656/756/856
13
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08
Setting
Mode
System User interface Card reader 3500 Device setting 0
0-
429496729
5
SYS
To enable the e-Bridge ID Gate, a card reading device
should be set in the order of "ABYYZZZZ". (Enter the
corresponding values to "A", "B", "YY" and "ZZZZ".)
- AB: Special setting
- A: Debugging NIC
0: Not used 1: Used
- B: Interface
0: USB connection 1: Serial connection (KP-2003
only)
- YY: Authentication
00: No authentication using card
03: Mifare (KP-2005 only)
04: HID (KP-2004 only)
06: KB Emulation I/F Reader
07: 3Track Magnetic Swipe Reader
09: 2Track Magnetic Swipe Reader
- ZZZZ: Sub-code (Specifies the usage type of card ID)
0000: No authentication using card
0001: IDm (Felica/NFC-Felica) and (or) UID
(Mifare/NFC-Mifare)
0002: Data (Felica/NFC-Felica/Mifare/NFC-Mifare)
0003: SSFC mode
5 Yes
08
Setting
Mode
System User interface Card reader 3501 Format information 1 0
0-
429496729
5
SYS
To access the data in the noncontact IC card, the Key
Information "LLLL" and the Sector Number "MMMM"
should be set. The "LLLL" should be set first, and then
"MMMM".
<KP-2005>
LLLL: Key information
MMMM: Sector number (hexadecimal number)
5 Yes