e-STUDIO556/656/756/856/557/657/757/857 © 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 208
[7134] Department data import partial failure
[7139] Certification from SCEP server acquisition failure
[713B] Certification import failure
[713D] User Combined data import failure
[713F] All data (Template/AddressBook/MailBox) import failure
Classification Error item
Maintenance error A part of the department data was not imported.
Check item Measures
Setting
There is a possibility that the amount of department data has exceeded the
maximum for registration during the import or the file contains invalid data.
Check if you are importing a valid file and also that the amount of
department data does not exceed the maximum.
Classification Error item
Maintenance error Failed to import the certificate by SCEP
Check item Measures
Setting
Check the SCEP server and the SCEP setting (automatic) in TopAccess
Administration > Security > Certificate Management.
Classification Error item
Maintenance error Failed to import the certificate
Check item Measures
Setting
Certificate may have a problem or be corrupted. Check the certificate and
perform the job again.
Classification Error item
Maintenance error The import of combined user information failed.
Check item Measures
Setting
Check if you are importing a valid file.
Classification Error item
Maintenance error The import of all data (templates, Address Book, Mailbox) failed.
Check item Measures
Setting
Check if you are importing a valid file.
To Next Page
Loading...
