[6]
A Bypass paper size detection sensor-3
(Refer to Table 1)
Other than A3/LD A3/LD
B Bypass paper size detection sensor-2
(Refer to Table 1)
Other than A4-R/LT-
R
A4-R/LT-R
C Bypass paper size detection sensor-1
(Refer to Table 1)
Other than A5-R/ST-
R
A5-R/ST-R
D Bypass paper size detection sensor-0
(Refer to Table 1)
Other than Card size Card size
E- --
F- --
G Bypass feed sensor No paper Paper present
H Bypass feed unit cover sensor Cover closed Cover opened
[7]
A Exit cover sensor Cove opened Cover closed
B Exit sensor Paper present No paper
C Fuser transport sensor No paper Paper present
D Reverse sensor-1 No paper Paper present
E Reverse sensor-2 No paper Paper present
F- --
G- --
H- --
[8]
A Tandem LCF connection switch Connected Not connected
B- --
C Tandem LCF Standby side mis-stacking sensor Correct stacking Incorrect stacking
D Tandem LCF Standby side empty sensor No paper Paper present
E- --
F Tandem LCF bottom sensor Bottom position Other than bottom
position
G Tandem LCF end fence home position sensor Home position Other than home
position
H Tandem LCF end fence stop position sensor Stop position Other than stop
position
[9]
A- --
B- --
C- --
D- --
E Exit/Reverse section connection Not connected Connected
F Horizontal transport sensor-1 Paper present No paper
G Horizontal transport sensor-2 Paper present No paper
H Horizontal transport sensor-3 Paper present No paper
[0]
A- --
B- --
C- --
D Finisher connection (IPC connection) Not connected Connected
E Fuser unit switch Connected Not connected
F Web motor connection signal Not connected Connected
G- --
H Developer unit switch Not installed Installed
Digital
key
Button Items to check
Contents
Highlighted display
e.g.
Normal display
e.g.
e-STUIDIO556/656/756/856
To Next Page
Loading...
