Toshiba e-STUDIO557 - Page 48

8
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
8 - 47
[E240] 2nd drawer transport jam (paper not reaching 2nd drawer transport sensor)
[E250] Option LCF transport jam (paper not reaching Option LCF transport sensor)
Replace parts Remarks
1st drawer transport sensor
1st drawer transport clutch
LGC board
1st drawer transport roller
Classification Error item
Paper transport jam Paper not reaching 2nd drawer transport sensor
Check item Measures
2nd drawer transport sensor (S39) • Sensor check (Perform the input check: 03-[FAX]OFF/[2]/[C])
• Connector check
• Harness check.
2nd drawer transport clutch (CLT5) • Clutch check (Perform the output check: 03-230)
• Connector check
• Harness check.
LGC board • Connector check (CN327, CN329)
• Board check.
Drive unit, Rollers • Gear check
• Roller check
Replace parts Remarks
2nd drawer transport sensor
2nd drawer transport clutch
LGC board
2nd drawer transport roller
Classification Error item
Paper transport jam Paper not reaching option LCF transport sensor
Check item Measures
Option LCF transport sensor • Sensor check (Perform the input check: 03-[FAX]OFF/[5]/[D])
• Connector check
• Harness check.
1st drawer transport clutch (CLT5) • Clutch check (Perform the output check: 03-272)
• Connector check
• Harness check.
LCF board • Connector check
• Board check.
Drive unit, Rollers • Gear check
• Roller check