ACE-tronics G9 ASD Installation and Operation Manual 171
Acc/Dec Pattern 2
Program Special Accel/Decel 1 – 4
This parameter enables a user-selected preprogrammed output profile that
controls the acceleration and deceleration pattern for the #2 Accel/Decel
profile.
See F502 for additional information on this parameter.
Settings:
Linear
S-Pattern 1
S-Pattern 2
Direct Access Number — F503
Parameter Type — Selection List
Factory Default — Linear
Changeable During Run — Yes
F503 F503
efesotomasyon.com -Toshiba inverter,drive,servo,plc
To Next Page
Loading...
