Toshiba HFC R407C - Page 35

35
CHECK
UNIT
Fault code display
Self-diagnostic function
Details of the malfunction check display
The following fault code display occurs when the check button is pressed for 1 second.
(Note: Up to 16 indoor units can be connected to one remote controller using group control.)
2 fault codes for each of the 16 indoor units can be displayed at 2 second intervals.
Example:
Display for fault codes:
The 1st fault detected
The 2nd fault detected
Indoor unit number
TEMP LOUVER
MANUAL
°c
TIMER
ADDRESSCONT. OFF ON