Toshiba IPedge IP5000 Series - STATION PROGRAMMING

STATION PROGRAMMING Add a Station
2-2 IPT Installation Manual July, 2013
STATION PROGRAMMING Station > Station Assignment
Add a Station Click on the Add icon to add a new station.
Edit a Station Click on a station in the list then, click on the Edit icon to change a
station.
Change a Prime DN Click on a station then click on the Change a Prime DN icon. Any other
stations with this DN on a PhDN button will be updated.
Delete a Station Click on a station in the list then, click on the Delete icon to remove a
station.
Create a Range of DNs Click on the Create PDN Range icon then, enter the DN range, the
extension type, Voice mail Box options and EMPA role.
Export Data Click on the Export Data icon output the Station Assignment data as a
CSV file.
Import Data Click on the Import Data icon to input a CSV file. The station assignment
data in the file will be entered into the IPedge/VIPedge system.
IPedge Net Station Check mark the Select IPedge Net Station box if applicable. This will send
the IPedge network DN information for this station to the other nodes.
IPedge Net is supported on IPedge systems only.
Survivable Station This reature applies to R1.2 and later IPedge systems, survivability is an
inherent property of VIPedge.
Table 3: Station Assignment Export values
Field CSV Column Description
Prime DN DirectoryNumber Prime Directory Number
Type DirectoryType Station Type
Name to Display Name Displayed Name
DisplayDN Displayed DN
VM MW Center Port VMMWCenterPort Pilot DN for Voice Mail
- ToneRingVoiceAnnounce 1 (Tone first 0 or 2 (Voice first)
COS Day 1 COSDay1 Day 1 Class of Service
- SystemCallForward System Call Forward Template number
VMID Code VoiceMailID Voice Mail box for this station
- CallHistoryMemory
Number of calls saved in the history for
this station (0 ~ 100)
Station SpDial Bins: StationSpeedDialAlloc Number of Station SpDial Bins
Network Calling Number NetworkCallingNumber CLID sent (32 max)