Toshiba IPedge IP5000 Series - System Call Forward; Create New Mailbox; VMID Code; Voicemail Password

PREFERENCE System Call Forward
2-4 IPT Installation Manual July, 2013
System Call Forward System Call Forward group number. Group number = 0~48 (Default = 0)
Create New Mailbox If the Create New mailbox is check-marked (default) the Enterprise
Manager will create the mailbox automatically when the station
assignment is saved.
VMID Code The Voice Mail box that will answer when this station calls VM and when
calls to this PDN are forwarded to VM.
Voicemail Password The password for this mailbox. Default = DN + 997.
Select Role Check-mark the Assign Personal Administration Role to assign an
Enterprise Manager Personal Administration (EMPA) Role. Select a
Phone User role from the drop down menu below. EMPA Normal User
and EMPA Super User are default roles. When the system administrator
adds additional roles.
Note: Click on Show advanced configuration to show all
parameters.
COS Day 1 Class of Service for Day 1 mode. Value = 1~ 32 (default = 1)
COS Day 2 Class of Service for Day 2 mode. Value = 1~ 32 (default = 1)
COS Night Class of Service for Night mode. Value = 1~ 32 (default = 1)
Note: Refer to System feature; Day Night Service
DRL Day 1 Destination Restriction Level for Day 1 mode. Value = 1~ 16 (default = 1)
DRL Day 2 Destination Restriction Level for Day 2 mode. Value = 1~ 16 (default = 1)
DRL Night Destination Restriction Level for Night mode. Value = 1~ 16 (default = 1)
Note: Refer to System feature; Day Night Service
FRL Day 1 Facilities Restriction Level for Day 1 mode. Value = 1~ 16 (default = 1)
FRL Day 2 Facilities Restriction Level for Day 2 mode. Value = 1~ 16 (default = 1)
FRL Night Facilities Restriction Level for Night mode. Value = 1~ 16 (default = 1)
Note: Refer to System feature; Day Night Service
QPL Day 1 Queuing Restriction Level for Day 1 mode. Value = 1~ 16 (default = 1)
QPL Day 2 Queuing Restriction Level for Day 2 mode. Value = 1~ 16 (default = 1)