P9 ASD Quick Start Guide 55
T
ORQUE
Torque Control
Reverse Speed Limit Input F427
Reverse Speed Limit Input Level F428
Torque Limit Settings
Power Running Torque Limit 1 F440
Power Running Torque Limit 1 Level F441
Regenerative Braking Torque Limit 1 F442
Regenerative Braking Torque Limit 1 Level F443
Acceleration/Deceleration Operation After Torque Limit F451
Torque Speed
Limiting
Speed Limit (Torque = 0) Center Value Reference F430
Speed Limit (Torque = 0) Center Value F431
Speed Limit (Torque = 0) Band F432
Allow Rotation in Specified Direction ONLY F435
F
EEDBACK
Drooping Control
Drooping Gain F320
Speed at 0% Drooping Gain F321
Speed at F320 Drooping Gain F322
Drooping Insensitive Torque F323
Drooping Output Filter F324
Feedback Settings
PID Control Switching F359
PID Feedback Signal F360
PID Feedback Delay Filter F361
PID Feedback Proportional Gain F362
PID Feedback Integral Gain F363
PID Deviation Upper-Limit F364
PID Deviation Lower-Limit F365
PID Feedback Differential Gain F366
Process Upper-Limit F367
Process Lower-Limit F368
PID Control Delay F369
PID Output Upper-Limit F370
PID Output Lower-Limit F371
Process Increasing Rate F372
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www .ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
