Toshiba P9 ASD - Complete the VLP Setup; Run the Motor;Pump in the Direct Mode

P9 ASD Quick Start Guide 59
C OMMUNICATIONS
C ommunications
Settings
Communication
Adjustments
Frequency Point Selection F810
Point 1 Setting F811
Point 1 Frequency F812
Point 2 Setting F813
Point 2 Frequency F814
Communication
Settings
Baud Rate (2-Wire RS485) F800
Parity (2-Wire and 4-Wire RS485) F801
ASD Number F802
Communications Time-Out (2-Wire and 4-Wire RS485) F803
Communication Time-Out Action (2-Wire and 4-Wire
RS485)
F804
Send Delay (2-Wire RS485) F805
ASD-to-ASD Communication (2-Wire RS485) F806
Baud Rate (4-Wire RS485) F820
RS485 Send Delay (4-Wire RS485) F825
ASD-to-ASD Communication (4-Wire RS485) F826
4-Wire RS485 Protocol (TSB/MODBUS) F829
Communication Option (DeviceNet/Profibus) Setting 1 F830
Communication Option (DeviceNet/Profibus) Setting 2 F831
Communication Option (DeviceNet/Profibus) Setting 3 F832
Communication Option (DeviceNet/Profibus) Setting 4 F833
Communication Option (DeviceNet/Profibus) Setting 5 F834
Communication Option (DeviceNet/Profibus) Setting 6 F835
Communication Option (DeviceNet/Profibus) Setting 7 F836
Communication Option (DeviceNet/Profibus) Setting 8 F841
Communication Option (DeviceNet/Profibus) Setting 9 F842
Communication Option (DeviceNet/Profibus) Setting 10 F843
Communication Option (DeviceNet/Profibus) Setting 11 F844
Communication Option (DeviceNet/Profibus) Setting 12 F845
Communication Option (DeviceNet/Profibus) Setting 13 F846
Disconnection Detection Extended Time F850
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www .ctiautomation.net - Email: info@ctiautomation.net