4.9 Main board/ FAN 4 Replacement Procedures
Portage 2000 Maintenance Manual (960-333) 4-29
Installing the main board
The following describes the procedure for installing the main board. (See Figure 4-19)
1. Stick the radiation sheet ① ② as shown in the drawing below.
Caution: Do not overlap the radiation sheet on the prohibited area sown in the
following rectangles.
2. Install the main board and secure it with the following screws.
• M2×4Z S-THIN HEAD screw x2
3. Connect the connector PJ34, PJ35, PJ352 to the main board.
①
②
To Next Page
Loading...
