Toshiba Portege R200

To Next Page

To Previous Page

4.16 MP FPC 4 Replacement Procedures

PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-35

Installing the MP FPC

To install the MP FPC, follow the steps below and refer to Figure 4-23.

1. Connect the MP FPC to the connector CN9500 on the system board and secure it

with the following screws.

• M2×3C S-FLAT HEAD screw x2

2. Install the kill switch holder and secure it with the following screw.

• M2×3C S-FLAT HEAD screw x1

Main Page

Table of Contents3
Overview7
Battery Pack14
Figure 4-1 Removing the Battery Pack14
PC Card/Sd Card16
- PC Card16
- Figure 4-2 Removing the PC Card16
- SD Card17
- Figure 4-3 Removing the SD Card17
Expansion Memory Module18
Figure 4-5 Removing the HDD Slot Cover20
Hdd20
Figure 4-6 Removing the HDD Assembly21
Figure 4-7 Removing the HDD21
Keyboard23
Figure 4-8 Removing the Keyboard Holder23
Figure 4-9 Removing the Keyboard24
Switch Board25
Figure 4-10 Removing the Switch Board25
Touch Pad27
Figure 4-11 Removing the Touch Pad Cover27
Figure 4-12 Removing the Touch Pad28
Cover Assembly/Battery Latch Assembly30
Figure 4-13 Removing the Cover Assembly (1)30
Figure 4-15 Removing the Battery Latch Assembly32
Bluetooth Module33
Figure 4-16 Removing the Bluetooth Module33
Speaker/Fingerprint Sensor Board34
Figure 4-17 Removing the Speaker/Sp FPC34
Figure 4-18 Removing the Fingerprint Sensor Board35
MDC Board36
Figure 4-19 Removing the MDC Board36
RTC Battery37
Figure 4-20 Removing the RTC Battery37
Wireless LAN Card38
Figure 4-21 Removing the Wireless LAN Card38
Fan39
Figure 4-22 Removing the Fan39
Mp Fpc40
Figure 4-23 Removing the MP FPC40
Hd Fpc42
Figure 4-24 Removing the HD FPC42
PC Card Slot43
Figure 4-25 Removing the PC Card Slot43
Lan/Modem Jack44
Figure 4-26 Removing the Lan/Modem Jack44
System Board45
Figure 4-27 Removing the System Board46
Figure 4-28 Removing the Internal Microphone47
Internal Microphone47
Figure 4-29 Removing the LED FPC48
Led Fpc48
Figure 4-30 Removing the Display Mask49
Display Mask49
Figure 4-31 Removing the FL Inverter51
FL Inverter/Lcd Unit51
Figure 4-32 Removing the LCD Unit52
Figure 4-33 Removing the Hinge Cap54
Figure 4-35 Removing the Hinge54
Hinge54
Figure 4-34 Removing the Palm Rest55
Wireless LAN Antenna/Bluetooth Antenna58
- Wireless LAN Antenna58
- Figure 4-36 Removing the Wireless LAN Antenna58
- Bluetooth Antenna59
- Figure 4-37 Removing the Bluetooth Antenna59
Fluorescent Lamp60
- Replacing the 12.1 Inch TMD Fluorescent Lamp61

Toshiba Portege R200 - Page 41

Table of Contents

Other manuals for Toshiba Portege R200

Related product manuals