4 Replacement Procedures 4.22 LED FPC
4-42 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
4.22 LED FPC
Removing the LED FPC
To remove the LED FPC, follow the steps below and refer to Figure 4-29.
1. Remove the following screws and LED FPC.
• M2×3C S-FLAT HEAD screw x2
Figure 4-29 Removing the LED FPC
Installing the LED FPC
To install the LED FPC, follow the steps below and refer to Figure 4-29.
1. Install the LED FPC according to the guide and secure it with the following screws.
• M2×3C S-FLAT HEAD screw x2
M2×3C S-FLAT HEAD
LED FPC
To Next Page
Loading...
