Toshiba Portege R200 - Figure 4-27 Removing the System Board

To Next Page

To Previous Page

4 Replacement Procedures 4.20 System board

4-40 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)

Figure 4-27 Removing the system board

Installing the system board

To install the system board, follow the steps below and refer to Figure 4-27.

1. Install the audio cover.

2. Install the system board and secure it with the following screws.

• M2×3C S-FLAT HEAD screw x2

3. Connect the LED cable to the connector CN3260 on the system board (front).

4. Connect the LCD cable and FL cable to the connectors CN5600 and CN5601 on the

system board.

M2×3C S-FLAT HEAD

System board

LED cable

Audio cover

FL cable

LCD cable

Main Page

Table of Contents3
Overview7
Battery Pack14
Figure 4-1 Removing the Battery Pack14
PC Card/Sd Card16
- PC Card16
- Figure 4-2 Removing the PC Card16
- SD Card17
- Figure 4-3 Removing the SD Card17
Expansion Memory Module18
Figure 4-5 Removing the HDD Slot Cover20
Hdd20
Figure 4-6 Removing the HDD Assembly21
Figure 4-7 Removing the HDD21
Keyboard23
Figure 4-8 Removing the Keyboard Holder23
Figure 4-9 Removing the Keyboard24
Switch Board25
Figure 4-10 Removing the Switch Board25
Touch Pad27
Figure 4-11 Removing the Touch Pad Cover27
Figure 4-12 Removing the Touch Pad28
Cover Assembly/Battery Latch Assembly30
Figure 4-13 Removing the Cover Assembly (1)30
Figure 4-15 Removing the Battery Latch Assembly32
Bluetooth Module33
Figure 4-16 Removing the Bluetooth Module33
Speaker/Fingerprint Sensor Board34
Figure 4-17 Removing the Speaker/Sp FPC34
Figure 4-18 Removing the Fingerprint Sensor Board35
MDC Board36
Figure 4-19 Removing the MDC Board36
RTC Battery37
Figure 4-20 Removing the RTC Battery37
Wireless LAN Card38
Figure 4-21 Removing the Wireless LAN Card38
Fan39
Figure 4-22 Removing the Fan39
Mp Fpc40
Figure 4-23 Removing the MP FPC40
Hd Fpc42
Figure 4-24 Removing the HD FPC42
PC Card Slot43
Figure 4-25 Removing the PC Card Slot43
Lan/Modem Jack44
Figure 4-26 Removing the Lan/Modem Jack44
System Board45
Figure 4-27 Removing the System Board46
Figure 4-28 Removing the Internal Microphone47
Internal Microphone47
Figure 4-29 Removing the LED FPC48
Led Fpc48
Figure 4-30 Removing the Display Mask49
Display Mask49
Figure 4-31 Removing the FL Inverter51
FL Inverter/Lcd Unit51
Figure 4-32 Removing the LCD Unit52
Figure 4-33 Removing the Hinge Cap54
Figure 4-35 Removing the Hinge54
Hinge54
Figure 4-34 Removing the Palm Rest55
Wireless LAN Antenna/Bluetooth Antenna58
- Wireless LAN Antenna58
- Figure 4-36 Removing the Wireless LAN Antenna58
- Bluetooth Antenna59
- Figure 4-37 Removing the Bluetooth Antenna59
Fluorescent Lamp60
- Replacing the 12.1 Inch TMD Fluorescent Lamp61

Toshiba Portege R200 - Figure 4-27 Removing the System Board

Table of Contents

Other manuals for Toshiba Portege R200

Related product manuals