3.2 Executing the Diagnostic Test 3 Tests and Diagnostics
3.2.1 Diagnostics menu (T&D)
To execute this program, press 1 Repair Main and press Enter in the startup menu, press
Enter. The following menu appears.
TOSHIBA personal computer XXXXXX DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 20XX
DIAGNOSTICS MENU :
1 - DIAGNOSTIC TEST
2 – ONLY ONE TEST
3 -
4 - HEAD CLEANING
5 - LOG UTILITIES
6 - RUNNING TEST
7 - FDD UTILITIES
8 - SYSTEM CONFIGURATION
9 – POWER OFF
0 – Exit to Repair menu
NOTE: To exit the DIAGNOSTIC TEST MENU, press the Esc key. If a test program is
in progress, press Ctrl + Break to exit the test program. If a test program is in
progress, press Ctrl + C to stop the test program.
PORTEGE R500 Maintenance Manual (960-634) [CONFIDENTIAL] 3-5
To Next Page
Loading...
