4 Replacement Procedures 4.20 Display portion
4.20 Display portion
Removing the Display portion
To remove the display portion, follow the steps below and refer to Figure 4-30 to 4-32.
1. Open the display 90 degrees and put the computer on the stand.
2. Pull out the wireless LAN antenna cables under the insulator.
3. Remove the following screws securing the hinge.
• M2.5×4C S-THIN HEAD ×2
4. Lift the display portion a little and remove it from the middle frame.
M2.5x4C S-THIN HEAD
M2.5x4C S-THIN HEAD
Middle frame
Wireless LAN
antenna cable
Insulator
Display portion
Figure 4-30 Removing the display portion (1)
4-50 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)
To Next Page
Loading...
