Toshiba Portege R500 - Lcd Unit

4.23 LCD unit 4 Replacement Procedures
4.23 LCD unit
Removing the LCD unit
To remove the LCD unit, follow the steps below and refer to Figure 4-36 and 4-37.
1. Peel off three mask cushions and one mask seal from the LCD mask.
2. Remove the following screws and LCD mask.
• M2×2.4C FLAT HEAD screw ×4
LCD mask
Mask seal
M2x2.4C FLAT HEAD
Mask cushion
Mask cushion
Figure 4-36 Removing the LCD unit (1)
PORTÉGÉ R500 Maintenance Manual (960-634) [CONFIDENTIAL] 4-59