Toshiba Portege R500 - Removing the Ssd

4.14 HDD/SSD 4 Replacement Procedures
4.14.3 SSD
Removing the SSD
To remove the SSD, follow the steps below and refer to Figure 4-19.
1. Remove the following screws and SSD. (SSD cable is connected on the back of the
SSD)
• M1.4×3C S-THIN HEAD ×3
2. Disconnect the SSD cable from the connector on the SSD.
CAUTION: The 1.8-inch HDD cable and SSD cable are the same.
Connector of the SSD
(On the back)
SSD
M1.4x3C S-THIN HEAD
M1.4x3C S-THIN HEAD
SSD cable
Figure 4-19 Removing the SSD
PORTÉGÉ R500 Maintenance Manual (960-634) [CONFIDENTIAL] 4-35