4 Replacement Procedures 4.7 PC card slot
4.7 PC card slot
Removing the PC card slot
To remove the PC card slot, follow the steps below and refer to Figure 4-9.
1. Turn over the base cover assembly.
2. Remove the following screws securing the PC card slot.
• M2×4C S-THIN HEAD screw ×2
• M2×3C S-THIN HEAD screw ×2
3. Remove the PC card slot from the base cover assembly.
M2x4C S-THIN HEAD M2x3C S-THIN HEAD
PC card slot
Figure 4-9 Removing the PC card slot
4-18 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)
To Next Page
Loading...
