4.20 Display portion 4 Replacement Procedures
5. Push the hook outside and remove the application button holder.
6. Disconnect the sensor cable from the connector on the sensor board.
7. Remove the sensor board from the application button holder.
Application button holder
Sensor cable
Sensor board
Hook
Figure 4-31 Removing the display portion (2)
8. Remove the power switch holder from the slot.
Power switch holder
Figure 4-32 Removing the display portion (3)
Installing the Display portion
PORTÉGÉ R500 Maintenance Manual (960-634) [CONFIDENTIAL] 4-51
To Next Page
Loading...
