3.31 BIOS SETUP 3 Tests and Diagnostics
3.31.2 Accessing the SETUP Program
While pressing ESC, turn on the power. Then press F1. The following display appears.
*1: In the case of a model with built-in 1:1.8 type HDD, it is displayed as follows.
Primary IDE(1F0H/IRQ14)
*2: In the case of a model with built-in 1.8 type HDD, it is not displayed.
PORTEGE R500 Maintenance Manual (960-634) [CONFIDENTIAL] 3-85
To Next Page
Loading...
