3.31 BIOS SETUP 3 Tests and Diagnostics
PORTEGE R500 Maintenance Manual (960-634) [CONFIDENTIAL] 3-89
(b) HDD Priority
This option enables to select the priority for the Built-in HDD or USB.
Built-in HDD→ USB (Default)
USB → Built-in HDD
6. Others
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a) Core-Multi Processing
The Core Multi-Processing sets the CPU operating mode.
The configuration for the Core Multi - Processing is carried out in the BIOS
setup program.
Enabled is Dual Core mode.
Disabled is Single Core mode.
Enabled Enables Core Multi-Processing functions. (Default)
Disabled Disables Core Multi - Processing functions.
(b) Dynamic CPU Frequency mode
Use this option to choose a setting from the followings.
Dynamically Switchable
Enables Intel
®
Core
TM
Duo processor featuring Intel
SpeedStep technology. (Default)
Always High Disables Intel
®
Core
TM
Duo processor featuring Intel
SpeedStep technology and always runs the processor at
its maximum speed.
Always Low Disables Intel
®
Core
TM
Duo processor featuring Intel
SpeedStep technology and always runs the processor at
its default speed.
(c) Execute-Disable Bit Capability
To Next Page
Loading...
