4 Replacement Procedures 4.16 ODD/SD board
5. Disconnect the SD cable and ODD cable form the connectors CN9710 and CN1820
on the SD board.
SD cable
ODD cable
SD board
CN1820
CN9710
Figure 4-23 Removing the ODD/SD board (2)
6. Remove the following screws and two metal plates from the ODD.
• M2×4C S-THIN HEAD ×2
Figure 4-24 Removing the ODD/SD board (3)
M2x4C S-THIN HEAD
Metal plate A
Metal plate B
4-40 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)
To Next Page
Loading...
