Troubleshooting Procedures
2-68 PORTÉGÉ R700 Series Maintenance Manual (960-833) [CONFIDENTIAL]
Check 2 It checks whether there are any abnormalities in a setup of HDMI TV, and returns
to Procedure 1. In addition, a HDMI setup of television should check "the
instructions manual of attachment on HDMI TV." If the problem still exists,
perform Check 3.
Check 3 The HDMI TV cable may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures. If the problem still exists,
perform Check 4.
Check 4 The HDMI TV may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures and check the operation. If the
problem still exists, perform Check 5.
Check 5 eSATA/HDMI/USB board (and FPC) may be damaged. Replace it with a new one
following the instructions in Chapter 4, Replacement Procedures and check the
operation. If the problem still exists, perform Check 6.
Check 6 The system board may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures.
To Next Page
Loading...
