4 Replacement Procedures 4.16 Fin
4-44 [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manual (960-833)
4 Replacement Procedures
4.16 Fin
Removing the Fin
To remove the fin, follow the steps below and refer to Figure 4-26.
1. Remove the following screws and fin.
• M2×3B S-THIN HEAD ×2
NOTE: When removing the fin, be sure to remove the screws in the reverse order of the
number marked on the fin.
Figure 4-26 Removing the fin
M2x3B S-THIN HEAD
Fin
To Next Page
Loading...
