4.17 Bluetooth module 4 Replacement Procedures
PORTÉGÉ R700 Maintenance Manual (960-833) [CONFIDENTIAL] 4-47
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below and refer to Figure 4-27.
1. Connect the Bluetooth harness to the connector on the Bluetooth module.
2. Connect the Bluetooth antenna cable to the connector on the back of the Bluetooth
module.
3. Turn up the insulator and set the Bluetooth module in place.
NOTE: When replacing a cover assembly with a new one, stick the cushion to the cover
assembly in place.
4. Connect the Bluetooth harness to the connector CN4440 on the system board.
To Next Page
Loading...
