4 Replacement Procedures 4.23 Keyboard
4-68 [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manual (960-833)
Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figure 4-42.
1. Stick a new insulator (KB INSULATOR) on the cover assembly.
2. Peel off the separator of the insulator (KB INSULATOR).
NOTE: When sticking a INSU KB to COVER ASSY, refer to the following figure.
3. Stick a new keyboard on the insulator.
4. Stick the aluminum tape (AL TAPE) on the back of the cover assembly.
NOTE: When sticking an AL TAPE, refer to the following figure.
To Next Page
Loading...
