–26–
Owner’s Manual
EN
To adjust the clock
Screen contrast
Adjust the contrast of the LCD.
1 Push the [ ∧] / [ ∨] button to select
“1. Clock” on the “Initial setting” screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧ ] / [ ∨] button to select
the Day, Month, Year, Hour, and Minute.
Push the “ -” [ F1] / “
+” [ F2] button to set the value.
3 Push the [ MENU] button.
The screen returns to the “Initial setting” screen.
The clock display appears on the upper right of the
screen.
• The clock display blinks if the clock setting has
been reset due to power failure or other cause.
The available date range is from January 1
st
, 2018 to December 31
st
, 2099.
1 Push the [ ∧ ] / [ ∨] button to select
“3.Screen contrast” on the “Initial setting”
screen, then push the “ Set” [
F2] button.
2 Push the “ -” [ F1] / “
+” [
F2] button to adjust.
3 Push the [ MENU] button.
The screen returns to the “Initial setting” screen.