–51–
Owner’s Manual
Schedule timer
• The items that are displayed vary depending on the model setting of the Air to Air Heat Exchanger.
• For details on setting “week”, refer to <week (Different schedule every day of the week)>. (Page 30)
1 In the “Ventilation” screen, press [ ] and
[ ] to select “Schedule timer”, and then
press [ Set/Fix]
2 Press [ ] and [ ] to select “Condition
setting”, and then press [ Set/Fix]
3 Press [ ] and [ ] to select “every day”,
and then press [ Menu]
4 Press [ Set/Fix]
5 Press [ ] and [ ] to select “--” (not set),
“ON”, “OFF” or a ventilation mode
6 Press [ ] to select start time and fan
speed
If “--” (not set) is displayed, the fan speed and time
cannot be set.
7 Press [ ] and [ ] to change the time and
fan speed
Press [ ] to switch to an item you want to change.
8 Press [ ] to move to the next pattern
Up to a total of 8 patterns can be set.
Do the settings in steps
5 to 7 to set each pattern.
9 Press [ Set/Fix]
A screen to confirm changes appears.
10 Press [ Set/Fix]
Return to the “Schedule timer” screen.
To Next Page
Loading...
Need help?
General
