11
EN
Introduction Connections Basic Setup Playback
Editing
Others
Function Setup
Recording
Functional Overview
Front Panel
1 B ON/STANDBY button
• Press to turn the unit on and off.
2 Disc tray
• Place a disc when the disc tray is opened.
3 A OPEN/CLOSE button*
• Press to open or close the disc tray.
4 Infrared sensor window
• Receive signals from your remote control so that
you can control the unit from a distance.
5 HDD mode indicator
• Lights up in blue when the unit is in HDD mode.
6 DVD mode indicator
• Lights up in green when the unit is in DVD
mode.
7Display
• Refer to “Front Panel Display Guide” on
page 19.
8 HDMI indicator
• Lights up and indicates the HDMI output mode
when HDMI output is on.
9DVIN jack (AV4)
• Use to connect the DV output of external device
with a DV cable.
10 AUDIO input jacks (AV3)
• Use to connect external device with an RCA
audio cable.
11 VIDEO input jack (AV3)
• Use to connect external device with an RCA
video cable.
12 S-VIDEO input jack (AV3)
• Use to connect the S-video output of external
device with an S-video cable.
13 I REC button
• Press once to start a recording. Press
repeatedly to start one-touch timer recording.
14 B PLAY button*
• Press to start or resume playback.
15 C STOP button
• Press to stop playback or recording.
• Press to stop timer recording.
16 DVD button
• Press to select the DVD output mode.
17 HDD button
• Press to select the HDD output mode.
1080p
RECPLAYSTOPHDD DVD
1080i 720p 576p/480p
DVD -RW/R +RW/R RECORDING
I/y
OPEN/CLOSE
ON/STANDBY
S-VIDEO DV INVIDEO L R
AV3
12
3*
56
17 16
101112
15 14* 13
4
78
9
The unit can also be turned on by pressing these buttons.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some
operations can be carried out using the buttons on the front panel.
E2J70BD_EN.book Page 11 Friday, June 29, 2007 2:50 PM
To Next Page
Loading...
