EasyManua.ls Logo

Toshiba RD-97DTKB - Setting a Disc to Protect; Finalising Discs

Toshiba RD-97DTKB
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
EN
Introduction Connections Basic Setup Playback
Editing
Others
Function Setup
Recording
Setting a Disc to Protect
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using the
Setup menu.
Insert a recordable disc.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [U \ D],
then press [ENTER/OK].
3 Select “Disc Protect OFF A ON”
using [U \ D], then press
[ENTER/OK].
4 Select “Yes” using [U \ D], then
press [ENTER/OK].
The disc is protected.
5 Press [SETUP] to exit.
Note
The Disc Protect setting is available only when a
disc recorded in VR or +VR mode is inserted.
You can select only “Disc Protect ON A OFF” when
a protected disc is inserted.
To cancel the disc protect:
Select “Disc Protect ON A OFF” at step 3, then
select “Yes”.
If you insert a disc protected with this unit,
“Disc Protect ON A OFF” will appear instead of
“OFF A ON”.
Finalising Discs
You will need to finalise discs to play them back in
other units.
Finalising may take from several minutes up to an
hour.
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.
Insert a recordable disc before
finalising.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [U \ D],
then press [ENTER/OK].
3 Select “Finalise” using [U \ D], then
press [ENTER/OK].
4 Select “Yes” using [U \ D], then
press [ENTER/OK].
e.g.) VR mode DVD-RW disc
Finalising will start.
To cancel finalising (DVD-RW disc only):
At step 4, press [STOP C]. Select “Yes” using
[U \ D], then press [ENTER/OK]. Finalising is
cancelled and the unit switches to stop mode.
If appears when [STOP C] is pressed, you
cannot cancel finalising because the finalising has
already reached at a critical point in its process.
If “No” is selected and [ENTER/OK] or
[RETURN/BACK] is pressed, finalising is
continued.
You cannot cancel finalising a DVD-R and
DVD+RW/+R disc once it has started.
DVD-RWDVD-RW
VR
DVD+RWDVD+RW D
D
VD+R
VD+R
DVD+R D
D
VD-R
VD-R
W
W
DVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R D
D
VD+R
VD+R
W
W
DVD+RW
D
D
VD+R
VD+R
DVD+R
Finalise disc?
Yes
No
Finalising
10%
Do you want to cancel ?
Yes
No
E2J70BD_EN.book Page 53 Friday, June 29, 2007 2:50 PM

Related product manuals