EasyManua.ls Logo

Toshiba RD-97DTKB - Formatting a Disc

Toshiba RD-97DTKB
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
EN
Introduction Connections Basic Setup Playback
Editing
Others
Function Setup
Recording
Formatting a Disc
Choosing the Recording Format of a
Blank DVD-RW Disc
When inserting a brand-new DVD-RW/+RW disc, the
unit automatically starts to initialise the disc.
DVD+RW disc will always be formatted in +VR mode,
and DVD-RW disc will be formatted either Video or
VR mode according to the recording format mode
setting of the unit. Before insert a brand-new
DVD-RW disc, you need to set the recording format to
the desired mode. You can also manually format a
DVD-RW disc once it has been used.
1 In stop mode, press [SETUP].
2 Select “DVD Menu” using [U \ D],
then press [ENTER/OK].
“DVD Menu” menu will appear.
3 Select “Format” using [U \ D], then
press [ENTER/OK].
Format menu will appear.
4 Select “Format Mode” using [U \ D],
then press [ENTER/OK].
5 Select “Video mode” or “VR mode”
using [U \ D], then press [ENTER/
OK].
6 Press [SETUP] to exit.
7 Insert a blank disc.
Formatting will start.
8 Formatting is complete.
“100%” is indicated.
Note
The recording format setting is effective only for
DVD-RW discs. You cannot change the recording
format for a DVD-R disc and DVD+RW/+R disc.
You cannot mix two formats on one DVD-RW disc.
If you insert a disc that has been recorded before,
the recording format cannot be changed even if you
change it in the Setup menu.
Make Recording Compatible
Use this feature to make the unfinalised +VR mode
discs recorded on other unit recordable on this unit.
When you make an additional recording on this unit
with “Make Recording Compatible” set to “ON”, the
title list is automatically converted to this unit’s style.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER/OK].
2 Select “Recording” using [U \ D],
then press [ENTER/OK].
3 Select “Make Recording Compatible”
using [U \ D], then press
[ENTER/OK].
4 Select “ON” or “OFF” using [U \ D],
then press [ENTER/OK].
5 Press [SETUP] to exit.
DVD-RWDVD-RW
Video
DVD-RWDVD-RW
VR
Format Mode
Video mode
VR mode
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
ON: Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
OFF: Prohibiting additional record to the disc that has
a title list created by other units.
DVD+RWDVD+RW D
D
VD+R
VD+R
DVD+R
Make Recording Compatible
ON
OFF
E2J70BD_EN.book Page 35 Friday, June 29, 2007 2:50 PM

Related product manuals