48
EN
Information on DV Dubbing
This function helps you to dub the contents in the
DVC (digital video camcorder) to HDD or DVD easily.
You can control basic operations of the DVC from the
remote control of this unit if the DVC is in video mode.
Guide to DV and On-Screen Display
1 Connect your DVC to the DV IN jack
on the front panel using a DV cable.
(Use the DV cable that has 4-pin
input jack and is compliance with the
IEEE 1394 standards.)
2 Press [INPUT SELECT F]
repeatedly to select the appropriate
external input channel for DV IN
(AV4).
3 Press [DISPLAY] to display the DVC
information on the screen.
When the DVC is in video mode...
When the DVC is in camera mode...
The menu changes according to the mode of DVC.
Switch the mode on the DVC to video mode for the
dubbing information.
1DV icon
2 Indicator of active device
• With “Control” highlighted, press [ENTER/OK]
to display the available devices to control with
the remote control of this unit. Select the device
you wish to operate using [U \ D], then press
[ENTER/OK].
- Select “HDD” / “DVD” to control this unit with the
remote control of this unit.
- Select “DVC” to control your DVC with the
remote control of this unit.
3 Recording audio mode
• “DV Audio” can be changed. With “DV Audio”
selected, press [ENTER/OK] to display
“DV Audio” menu. Select the audio you wish to
output using [U \ D], then press [ENTER/OK].
- Select “Stereo1” to dub the stereo sound.
- Select “Stereo2” to dub the sound that was
added after the recording.
- Select “Mix” to dub the stereo1 and stereo2.
4 Command menu
• “Start Rec” or “Pause Rec” will appear.
5 External input channel
6 Product name of your DVC
• If the unit cannot recognise the input signal from
the DVC or if it is the unknown product,
“No Device” or “****” will appear instead.
7 Status of the current operation and the
time counter
Each icon means (Available icons may vary
depending on the DVC):
The following instructions are described with
the operations using the remote control of this
unit.
DV
AB-1234
0:12:34
1/ 1 1/ 1
Control DVD
DV Audio Stereo1
Start Rec
DVD SP 2:00
-
RW VR ORG
2
3
1
4
T C
DV
AB-1234
0:12:34
1/ 1 1/ 1
-
RW VR ORG
DVD SP 2:00
7
5
6
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding. (standard speed)
DVC is fast forwarding. (faster than above)
DVC is fast forwarding. (faster than above)
DVC is slow forwarding. (standard speed)
DVC is slow forwarding. (faster than above)
DVC is slow forwarding. (faster than above)
DVC is fast forwarding. (in stop mode)
DVC is fast reversing. (in stop mode)
DVC is fast reversing. (standard speed)
DVC is fast reversing. (faster than above)
DVC is fast reversing. (faster than above)
DVC is in slow reverse playback.
DVC is in recording.
DVC is in recording pause mode.
Please also read the operating instructions of
your DVC for more information.
E2J70BD_EN.book Page 48 Friday, June 29, 2007 2:50 PM
To Next Page
Loading...
