50
EN
Information on Dubbing
You can dub the contents of the HDD to DVD or vice
verse. Before you start dubbing, refer to page 33 to
see the recording compatibility.
Guide to Dubbing Menu Display
1 Dubbing direction
2 Dubbing menu
3 Remaining recordable space
4 Dubbing list
5 Current page number / total number of
pages
Recording Mode for Dubbing
“High”
This unit is compatible with the high speed dubbing
from HDD to DVD or VR mode DVD-RW disc to HDD.
High speed dubbing offers you the dubbing speed of
32 times the SLP mode dubbing. To perform the high
speed dubbing, set the recording mode to “High”.
• Duration of high speed dubbing will vary depending
on the recording mode or the title amount.
• High speed dubbing is not available when;
- recording mode is set to other than “High”.
- dubbing from a video mode DVD –RW/-R or
DVD+RW/+R disc to the HDD.
- there is not enough space in the disc.
- dubbing a title which last more than 4 hours to
DVD+RW / +R discs.
- dubbing a title which last more than 8 hours to
DVD-RW / -R discs.
- dubbing a title recorded in EP or SLP mode to
DVD+RW / +R discs.
• During dubbing, you only can use [C STOP] on the
front panel, and any other buttons will be invalid.
• High speed dubbing of a HDD title which has
bilingual audio is only available to VR mode
DVD-RW disc.
“Auto”
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically.
• The recording may be cut short when the available
recording space of the disc is too limited.
Note
• During normal dubbing, you can watch the playback
picture of the title being dubbed (the audio cannot
be changed). During high speed dubbing, however,
the playback picture will not appear.
• When you dub a HDD title that has bilingual audio to
Video mode DVD-RW / -R or DVD+RW / +R disc,
select an appropriate audio format in the “Bilingual
Recording Audio” menu. Refer to “Setting Bilingual
Recording Audio” on page 38.
• Dubbing of a copy-once programmes are only
available when you dub HDD to DVD-RW disc with
Content Protection for Recordable Media (CPRM)
formatted in VR mode, and in this case, the
programmes does not remain on the HDD.
• In order to dub a DVD recorded with the NTSC, set
the “TV System” to “PAL”. Refer to “
9. TV System”
on page 83.
• If you stop the dubbing halfway, the contents will be
dubbed up to the point where you stop the dubbing
(except for the high speed dubbing). With high
speed dubbing, nothing will be dubbed if you stop it
halfway.
• To stop the dubbing in progress, press [C STOP] on
the front panel. If you stop the high speed dubbing,
confirmation message appears. Select “Yes” using
[U \ D], then press [ENTER/OK] to proceed.
Other recording modes
Refer to page 34 for the information on other
recording modes.
HDD DVD
1/1
3000 MB
Dubbing List
Add
Delete All
Dubbing Start
1
2
3
4
5
E2J70BD_EN.book Page 50 Friday, June 29, 2007 2:50 PM
To Next Page
Loading...
