38
EN
Setting Bilingual Recording Audio
You can select either “Main” or “Sub” audio to record a
bilingual broadcast in Video mode or +VR mode.
This setting is only for recording analogue channel.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER/OK].
2 Select “Recording” using [U \ D],
then press [ENTER/OK].
3 Select “Bilingual Recording Audio”
using [U \ D], then press
[ENTER/OK].
4 Select “Main” or “Sub” using
[U \ D], then press [ENTER/OK].
5 Press [SETUP] to exit.
Note
• If you are recording onto a HDD or VR mode disc,
both “Main” and “Sub” will be recorded regardless of
your setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.
Recording Audio Select (XP)
You can enjoy high quality sound recording. This
function works only when the recording mode is set at
XP.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER/OK].
2 Select “Recording” using [U \ D],
then press [ENTER/OK].
3 Select “Recording Audio Select
(XP)” using [U \ D], then press
[ENTER/OK].
4 Select “PCM” or “Dolby Digital”
using [U \ D], then press
[ENTER/OK].
5 Press [SETUP] to exit.
Note
• “PCM” stands for Pulse Code Modulation. It
changes analogue sound to digital sound without
compressing audio data.
• When the recording mode is set at other than XP,
the unit records “Dolby Digital” audio automatically
even if you selected “PCM”.
DVD-RWDVD-RW
Video
DVD-RDVD-R D
VD+R
W
DVD+RW D
VD+R
DVD+R
Bilingual Recording Audio
Main
Sub
PCM: Records PCM audio for the best
quality sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.
HDDHDD
D
VD-R
W
DVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R
D
VD+R
W
DVD+RW D
VD+R
DVD+R
Recording Audio Select (XP)
PCM
Dolby Digital
E2J70BD_EN.book Page 38 Friday, June 29, 2007 2:50 PM
To Next Page
Loading...
