43
EN
Introduction Connections Basic Setup Playback
Editing
Others
Function Setup
Recording
The error numbers indicate:
• Timer program with an error number will be
cleared once the entry screen for the program is
displayed.
E1–E22,
E37–E39 : Recording error
E23–E24 : Unrecordable disc
E25 :
:
• Copy prohibited programme
• Cannot record because of the NTSC
/ PAL-60 signal is received.
E26–E28 : Copy prohibited programme
E29 : Disc protected
E30 : Disc full
E31 : Already recorded 99 titles (Video
mode)
E32 : Already recorded 99 titles (VR mode)
E33 : Already recorded 999 chapters
E34 : No space for Control Information
E35 : PCA (Power Calibration Area) full
E36 : Already finalised Video format disc
E40 :
:
• There are some unrecorded parts
due the overlapped timer
programmes.
• Recording did not start at the start
time.
E41 : Power failure
E42 : No disc
E43 : Already 49 titles recorded
(+VR mode)
E44 : Already 254 chapters recorded
(+VR mode)
E45 : Copy prohibited programme
E46 : It is impossible to record additionally
on a disc recorded by other units
when setting “Make Recording
Compatible” to “OFF”. (+VR mode)
E47 : Already 600 titles recorded on the
HDD.
E49 : HDD recording is cancelled due to the
insufficiency of the disc space on the
HDD.
E2J70BD_EN.book Page 43 Friday, June 29, 2007 2:50 PM
To Next Page
Loading...
