EN
91
Introduction Connections Basic Setup Playback
Editing
Others
Function Setup
Recording
Error message Cause Solution
Disc Error
— Please eject the disc. —
Playback feature may not be
available on this disc.
• An unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert a standard disc. (See page 9-10.)
• Insert the disc with the labelled side facing
up.
Region Error
— Please eject the disc. —
Playback is not authorized in
your region.
• Playback is not authorised in the region of
the DVD-Video that you inserted in the
unit.
• Insert a DVD-Video with region codes 2 or
ALL.
Parental Lock On
The current selected parental
level prohibits playback.
• The current selected parental level in the
Setup menu prohibits playback.
• Check the “Parental Lock” setting. (See
page 81.)
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered a
copy prohibited programme.
• Original source is in NTSC system.
• You cannot record copy prohibited
programmes.
Recording Error
This program is not recordable in
Video mode.
• You are trying to record a copy-once
programme onto a DVD-RW disc in Video
mode.
• Set “Format Mode” to “VR mode”. (See
page 35.)
Recording Error
Cannot record on this disc.
• You are trying to record onto a disc that is
unrecordable, or the disc status does not
satisfy recording requirements.
• The disc is dirty.
• The disc is damaged.
• You are trying to record onto a VR mode
DVD-RW disc which contained recordings
from another recorder.
• Insert a recordable disc, and ensure the
disc status satisfies the recording
requirements. (See page 33.)
• Clean the disc with a cleaning cloth.
• Replace the disc.
• Disc may need formatting.
Recording Error
This program is not allowed to be
recorded on this disc.
• You are trying to record a copy-once
programme onto a DVD disc that is not
compatible with CPRM.
• Insert a ver. 1.1 or ver. 1.2 DVD-RW disc
(compatible with CPRM.)
Recording Error
This disc is protected and not
recordable.
• You are trying to record onto the DVD-RW,
DVD+RW / +R disc that is set as
protected in the Setup Menu.
• Remove the disc protect setting in the
Disc menu. (See page 53.)
Recording Error
Disc is full.
(No area for new recording)
• You are trying to record onto the VR mode
DVD-RW disc that has no space for
recording.
• Insert a recordable disc with enough
recording space.
• Delete unnecessary original titles. (See
page 71.)
Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)
• You are trying to record onto the
DVD-RW / -R disc on which the number of
recorded titles has reached the maximum
(99).
• Delete unnecessary original titles. (See
page 71.)
Recording Error
You cannot record more than
999 chapters on one disc.
(The maximum is 999)
• You are trying to record onto the VR mode
DVD-RW disc on which the number of
recorded chapters has reached the
maximum (999).
• Delete unnecessary chapter marker from
an Original list. (See page 73.)
Recording Error
You cannot record more than 49
titles on one disc.
(The maximum is 49)
• You are trying to record onto the
DVD+RW/+R disc on which the number of
recording titles comes up to the maximum
(49).
• Delete unnecessary titles. (See page 71.)
Recording Error
You cannot record more than
254 chapters on one disc.
(The maximum is 254)
• You are trying to record onto the DVD+RW
disc on which the number of recording
chapters comes up to the maximum (254).
• Delete unnecessary chapter marks. (See
page 73.)
Recording Error
You cannot record on this disc as
Control Information is full.
• This disc has no space to write Control
Information when recording or deleting
contents.
• When editing has been repeatedly
performed, the control information area
may become full even though the
recording area has enough space.
• Delete unnecessary original titles. (See
page 71.)
Recording Error
You cannot record on this disc as
Power Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this area
may become full.
• Every time you insert a disc for recording,
part of the disc’s working area will be
used.
• If you repeat this frequently, it will be used
up quicker and you may not be able to
record maximum number of titles for the
disc.
• Insert a new disc.
Recording Error
This disc is already finalised.
• You are trying to record onto a disc that is
already finalised.
• Release the finalising for the disc. (See
page 53.)
E2J70BD_EN.book Page 91 Friday, June 29, 2007 2:50 PM
To Next Page
Loading...
