52 RemotEye II User Manual – 50024-014
UPS Battery Test
This menu allows the administrator to select the battery mode. The available menu options will be a
function of the UPS type.
Last Test Start Time
This field shows the start time of the last battery test. This value is displayed in the hh:mm:ss 24-hour
format (i.e., 8:30 p.m. is 20:30:00).
Last Test Elapsed Time
This field shows the elapsed time (in seconds) of the last battery test.
Last Test Results
This field shows the test results of the last battery test.
Battery Test Command
None : No action
Quick Test (10 sec) : Perform battery test for ten seconds.
Cancel Test : Cancel the battery test (not more than 1 minute).
Clear Test Results : Clear the last battery test data recorded by the RemotEye II.
To Next Page
Loading...
