RemotEye II User Manual – 50024-014 93
Toshiba RemotEye II Application Program
Toshiba RemotEye II Client Software
The Toshiba RemotEye II Client Software runs on servers and connects to a designated RemotEye II.
When the servers start up the RemotEye II scans for the UPS status. When UPS power events are
detected, the RemotEye II broadcasts a Shutdown command to the workstation. The Toshiba RemotEye
II Client Software will broadcast warning messages (on the screen of the servers) and then shutdown the
server gracefully.
Installation of RemotEye II Client using Windows 9x/2000/NT/XP
Insert the RemotEye II CD-ROM into the CD-ROM drive.
Run the Installer.exe program (on the CD-ROM).
A dialog box will be displayed on the screen, type in the IP address of the designated RemotEye II, its
Client Name, and its Shutdown Delay Time. Click the Def. button to enter the workstation’s name as the
Client Name setting (see Figure 20: ).
Upon completion of the setup screen’s entries, click OK and the RemotEye II service will connect to the
RemotEye II automatically.
Figure 20: Toshiba RemotEye II Client Software
To Next Page
Loading...
