Toshiba Satellite C800 - Log Utilities; 1 Operations; Operations

Test Program for Field.
58 Satellite L840 Tests and Diagnostics Manual
3.18 Log Utilities
This function logs error information generated while a test is in progress and stores the results
in RAM (Maximum error log : 500 times). This function can store data on a floppy disk. If
the power switch is turned off, the error information will be lost. Error information is
displayed in the following order:
1. Error count (CNT)
2. Test name and subtest number (TEST)
3. Pass count (PASS)
4. Error status (STS)
5. FDD/HDD or memory address (ADDR)
6. Write data (WD)
7. Read data (RD)
8. Error Name ( ERROR NAME/DETAILS)
3.18.1 Operations
1. Select 04 and press Enter in the Diagnostics Menu to log error information into RAM
or onto a floppy disk. Error information is displayed in the following format:
XXXX ERRORS
PASSCOUNT = XXXX
CNT
TEST
PASS
STS
ADDR
WD
RD
ERROR NAME/DETAILS
001
FDD 02
0000
180
0000001
00
00
WRITE PROTECTED
002
FDD 01
0000
120
0000001
00
00
TIME OUT ERROR
Address
Error Status
Pass Count
Subtest Number
Read Data
Test Name
Write Data
Error Count
Error Name and Detail
[[1:Next, 2:Prev, 3:Exit, 4;Clear, 5:FD Log Read, 6:FD Log Write, 7:Log Save]]