Toshiba Satellite C800 - Common Tests and Operation; 1 How to Operate a Window; 2 How to Stop the Test Program; 3 Test Status Screen

Test Program for Field.
Satellite L840 Tests and Diagnostics Manual 63
3.21 Common Tests and Operation
3.21.1 How to operate a window
To input parameters, or open a window use the following keys.
key : to move a highlight bar
[Enter] key : to select an item at the highlight bar
[Esc] key : to close the current window and go back to the previous
window
3.21.2 How to Stop the Test Program
To stop a test:
[Ctrl]+[Break] Press the Ctrl key and the Break key simultaneously.
3.21.3 Test Status Screen
NOTE: The Test Status Screen does not display during all the tests. See the specific test
description Sections 3.4 through 3.14.
The following Test Status screen displays during most tests. See the description of each test
Sections 3.4 through 3.14 for specific screen information.
Test Name
Sub Test
:0101
Pass Count
:00000
Error Count
:00000
Write Data
:00
Read Data
:00
Address
:00000000
Status
:00
Test Name Displays the name of the test being executed.
Subtest No. Displays the Subtest number in the following format:
ffgg
ff = Subtest No.