Replacement Procedures
Satellite C800 and Satellite L800
Maintenance Manual (960-Q08) 17
4.6 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-6-1~4-6-3).
CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the
frame and do not touch the keycap.
1. Upside down the computer.
2. Remove Battery、HDD Door 、ODD and HDD.
3. Push the hook and the keyboard following the direction of the arrows, then turn over
the machine, insert your finger into the gap between the Keyboard and Top. Then, lift
up the keyboard to remove it.
4. Disconnect keyboard cable.
5. Remove keyboard.
Figure 4-6-1 push the hook and the keyboard
To Next Page
Loading...
