Toshiba Satellite C800 - Page 168

Replacement Procedures
Satellite C800 and Satellite L800 Maintenance Manual (960-Q08) 12
Installing HDD-H9.5mm
The following describes the procedure for installing the main HDD.
1. Install a HDD bracket.
 M3.03.5B FLAT BIND screw x2
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD holder.
2. Insert the HDD assembly into the HDD slot and connect it carefully to the HDD on
the system board.
3. Secure the HDD assembly with the following screw.
 M23.0B FLAT BIND screw x2
4. Secure the HDD Door with the following screws.
 M2.54.0B FLAT BIND screw x2