Replacement Procedures
Satellite C800 and Satellite L800
Maintenance Manual (960-Q08) 22
Installing a Wireless LAN card
The following describes the procedure for installing a Wireless LAN card.
1. Insert a wireless LAN card terminals slantwise into the connector on the computer
and press a wireless LAN card and lock the secure screws.
M2.5. x 3.0B BIND screw x1
2. Connect the wireless LAN antenna cable to the terminals on a wireless LAN card.
3. Put the wireless LAN antenna cable on the right location from the guide.
4. Stick the tape of cables on the surface. If fail to stick, replace tape with new adhesive
tape. (See Figure 4-7-4).
Figure 4-7-4 Cables layout on motherboard
To Next Page
Loading...
