3 Diagnostic Programs 3.3Option
24 Satellite/ Satellite Pro /C850D/C855D/L850D/L855D/L850D/C850D
Maintenance Manual
Maintenance ManualMaintenance Manual
Maintenance Manual
3.3.6 LOG Parameters Setting
You can access the Log Parameters screen through Service Diagnostics\Options -
Generate Report.
•
Report Destination
If selecting 'NONE', no log file will be generated; if selecting 'FILE', a log file with
the name specified in 'Log File Name' will be generated.
•
Log Options
Log Errors
If selecting this parameter, errors will be recorded when the test fails.
Log Test Activities
If selecting this parameter, the subtest results will be recorded.
Log Test Start Time
If selecting this parameter, the start time of the test will be recorded.
Log Test End Time
If selecting this parameter, the end time of the test will be recorded.
Log Errors Only
If selecting this parameter, errors will be recorded only when the test fails.
Log Errors Only with Time
To Next Page
Loading...
