4. 10 System board 4 Replacement Procedures
Satellit /Satellite Pro /C850D/C855D /L850D/L855D Maintenance Manual 4--31
Installing the System Board
Install the System Board according to the following procedures and figure 4-19.
NOTE:
Be careful of the eject button for the PC card. It can be damaged when installing the
system board. Make sure it is pushed in.
1. Connect the DC-IN cable to CN6000 on the system board.
2. Connect the USB board cable to CN9100 on the system board.
3. Connect the Power board cable to CN200 on the system board.
4. Seat the system board in the correct position.
5. Secure the system board with one M2x3 black flat-head screw.
6. Secure the Power board with two M2x3 black flat head screws.
7. Secure the USB board with one M2x3 black flat head screw.
To Next Page
Loading...
