4 Replacement Procedures 4.11 Display Mask
4--32 Satellit /Satellite Pro /C850D/C855D /L850D/L855D Maintenance Manual
4.11 Display Assembly
Removing the Display Assembly
Remove the display assembly according to the following procedures and Figures 4-20.
1. Open the display panel at an angle of 90 degrees.
2. Turn the computer upside down.
3. Remove four M2.5x6 black flat head screws securing the LCD module to the top
cover.
M2 5x6 0 black flat head screw. .
Display assembly
Figure 4-20 Removing the display assembly
To Next Page
Loading...
