4.9 CPU 4 Replacement Procedures
Satellit /Satellite Pro /C850D/C855D /L850D/L855D Maintenance Manual 4-27
4.9 CPU
Removing the CPU
Remove the CPU according to the following procedures and Figures 4-15, 4-16, 4-17 and
4-18.
NOTE: FOXCONN CPU socket will be 180 degrees to the right.
1. Tear off the CPU mylar.
2. Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the left with a
flat-blade screwdriver (in the order shown in the figure below).
3. Remove the CPU.
CPU Mylar
CPU
Figure4-15 Removing the CPU mylar
CLOSED
OPEN
CLOSED
OPEN
CLOSED
OPEN
CLOSED
OPEN
CLOSED
OPEN
Figure 4-16 Removing the CPU
CAUTION: When removing the CPU, keep the following in mind:
The CPU can become very hot during operation. Be sure to let it cool down before
starting repair work.
To Next Page
Loading...
