4 Replacement Procedures 4.5 ODD Bay Module
4-18 Satellit /Satellite Pro /C850D/C855D /L850D/L855D Maintenance Manual
Disassembling the ODD Drive
NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble
or replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4-7.
1. Remove two M2x3 black flat head screws.
2. Remove the bracket and ODD bezel.
ODD bezel
ODD bay module
Bracket
M2 0x3 0 black flat head screw. .
Figure 4-7 Removing the bracket from the ODD drive
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures and Figure 4-7.
1. Seat the bracket and secure it with two M2x3 black flat head screws.
2. Reinstall the ODD bezel.
To Next Page
Loading...
