4 Replacement Procedures 4.13Display Mask
4-36 Satellit /Satellite Pro /C850D/C855D /L850D/L855D Maintenance Manual
4.13 Display Mask
Removing the Display Mask
Disassemble the Display Mask according to the following procedures and Figure 4-22.
1. Peel off four seal tapes and remove four M2.5x4.5 white flat head screws securing the
display mask.
2. Insert your finger between the edge of display mask and the LCD and remove the
display mask while unlatching the display mask.
Seal
Seal
M2 5x4 5 white flat head screw. .
M2 5x4 5 white flat head screw. .
Display mask
Latch
Figure 4-22 Removing the display mask
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-22.
1. Install the display mask and lock the latches.
NOTE: When installing the display mask, ensure there is no gap between the display mask
and the display cover.
2. Secure the display mask with four
M2.5x4.5 white
flat head screws and stick four seal
tapes.
To Next Page
Loading...
